Troubleshooting; Accessories - Truma BC 416 IU Mode D'emploi

Troubleshooting

Error
The battery does not charge.
The maximum charging cur-
rent is not reached.
If these measures do not solve the problem, please con-
tact the Truma Service Centre.
Rectification
Check all connections from
the automatic charger to
the battery, ensure that they
are connected to the right
terminals. Unplug the cold
device plug on the device
then plug in again. Check all
fuses and the mains supply
connection.
The device is too warm, en-
sure better ventilation of the
device.

Accessories

Quickpower terminal clamps
For fast manual connection
and release of the battery con-
nections. Suitable for all DIN
and SAE connections
(part no. C11000-02100).
Temperature sensor for the battery
Allows temperature-controlled battery charging.
Temperature sensor with a
2 m connection cable and at-
tachment material
(part no. C11000-00700).
Temperature sensor with a
6 m connection cable and
attachment material
(part no. C11000-00800).
21