Checking The Specifications - MPMan MP-AV20 Mode D'emploi

3. Checking the Specifications

GENERAL
Adaptor
DC +9V +/- 5%, 2A
Current consumption
850mA~1500mA
Power Supply
Lithium ion 7.2V 2200mAh(rechargeable, discrete type)
AUDIO
Decoding
MPEG-1,2, MP3, WMA
Audio Sampling rates
32KHz, 44.1KHz, 48KHz, 88.2KHz, 96KHz
Voice output
1.2V(RMS)/ 1K 0.5W, 3.5mm earphone jack
Bandwidth of output frequency
20Hz ~ 20KHz
S/N rate
> 90dB
VIDEO
Video Decoding
MPEG-1, MPEG-2, MPEG-4,
AVI files: DivX files, Xvid
JPEG image files: resolution 1920X 1080 max.
Video output
NTSC/PAL
Composite video output 75 Ohm/1.0Vpp
OTHERS
Monitor
2.5" TFT-LCD
USB
USB 2.0(compatible with USB1.1)
Remote controller
Infrared type
Volume of Hard disk
20/40GB
Dimensions 142(L) X 85(W) X 40 (H) mm
14
(basic:850mA, Continuous playing of Moving Picture)
*This specification should be subjected to change.
Ⅳ After checking all items
1. Charging a storage battery with electricity
A. In the case of charging a battery from the mpman MP-AV20/40
First, switch off, and fasten the battery to mpman MP-AV20/40. Next, insert the
battery jack to DC IN of mpman MP-AV20/40, and insert the plug of the adaptor
into outlet. Then, it should be charged the battery with electricity automatically.
①Fasten the battery ②Insert the battery jack
to DC IN
B. In the case of charging a battery from a charger (option)
Fasten the battery to the portable charger. The indicator lamp should be
changed to green color if the battery is full.(Charging time: about 3 hours (at the
situation of fully discharge of electricity)
15
③Insert the plug of the
adaptor into outlet
(Option)