Additional Information; Upgrading Firmware - MPMan MP-AV20 Mode D'emploi

3. Seeing the Image
A. Choose with the navigation
button, next press OK button, and
then the image files will be listed.
B. Select the image wanted with navigation
C. Press OSD button on the left side of the
D. Press OSD once more in order to
24
button, next press OK button, and then,
you can enjoy the pictures.
top of the remote control in order to
confirm the information about the image
file on seeing.
remove the file's information on the
screen.
Ⅵ

Additional Information

1. Upgrading Firmware

Must upgrade firmware after connecting Adaptor.
Must turn on the switch at the state of pressing "upgrade" button
of mpman MP-AV20/40 if you want to use the function
downloaded.
A. Connect PC to mpman MP-AV20/40 with USB cable.(refer page 17)
B. Make "romfs" fold on new hard drive.
Use small letters only for the fold name, "romfs."
C. Download the firmware files from a
resource center, save them into "romfs",
and turn off the switch.
D. Turn on mpman MP-AV20/40 on the state
of pressing "UPGRADE" button.
E . Wait for a while until appearing the screen
of 'firmware upgrade"
F. Press "Play" button if you want to
progress, but press "Stop" button if you
want to stop. The firmware upgrade
should be processing if you press "Play"
button following messages.
25