Berner BSD-HD-1 Manuel D'instructions page 12

OBJ_BUCH-296-002.book Page 11 Wednesday, February 10, 2010 9:22 AM
Technical Data
Screwdriver
Art. No.
Rated power input
Output power
No-load speed
Rated speed
Tool holder
Max. screw dia.
Weight according to EPTA-Procedure 01/2003
Protection class
The values given apply for nominal voltages [U] of 230/240 V.
Noise/Vibration Information
Measured sound values determined according to EN 60745.
Typically the A-weighted noise levels of the product are:
Sound pressure level
Sound power level
Uncertainty K=
Wear hearing protection!
Vibration total values (triax vector sum) determined according to EN 60745:
Screwdriving without impact:
Vibration emission value a
h
Uncertainty K =
The vibration emission level given in this information
sheet has been measured in accordance with a stand-
ardised test given in EN 60745 and may be used to
compare one tool with another. It may be used for a
preliminary assessment of exposure.
The declared vibration emission level represents the
main applications of the tool. However if the tool is
used for different applications, with different accesso-
ries or poorly maintained, the vibration emission may
differ. This may significantly increase the exposure
level over the total working period.
An estimation of the level of exposure to vibration
should also take into account the times when the tool
is switched off or when it is running but not actually
doing the job. This may significantly reduce the expo-
sure level over the total working period.
Identify additional safety measures to protect the
operator from the effects of vibration such as: main-
tain the tool and the accessories, keep the hands
warm, organisation of work patterns.
Declaration of Conformity
We declare under our sole responsibility that the
product described under "Technical Data" is in con-
formity with the following standards or standardization
documents: EN 60745 according to the provisions of
the directives 2004/108/EC, 2006/42/EC.
Technical file at:
Berner AG, Bernerstr. 6, D-74653 Künzelsau
2 609 932 732 • 10.2.10
min
min
mm
=
BSD-HD-1
040745
W 701
W 327
-1
0 – 2500
-1
0 – 1700
¼" hexagon socket
6
kg 1.5
/ II
dB(A)
dB(A)
m/s
m/s
Künzelsau, 02.02.2010
Jörn Werner Ulrich Lindner
CEO COO
02.02.2010, Berner GmbH; Bernerstraße 6;
D-74653 Künzelsau
Assembly
Changing the Tool (see figure A)
Before any work on the machine itself, pull
the mains plug.
Pull off the screwing-depth stop 4 toward the front.
Pull out the screwdriver bit 1. If required, the universal
bit holder 10 can also be pulled off and replaced.
After changing the tool, reattach the screwing-depth
stop 4.
BSD-S-1
040749
701
327
0 – 4500
0 – 3000
¼" hexagon socket
6
1.4
/ II
040745 040749
85 85
96 96
dB 3 3
2
4.0 < 2.5
2
1.5 1.5
English | 11