AERMEC GR3 Manuel D'utilisation page 10

SETTING OF TIME AND DAY OF THE WEEK (available with PGS accessory only)
Image
SET
R
L
R
C1
C2
SET
R
L
R
C1
C2
SET
R
L
R
C1
C2
SET
R
L
R
C1
C2
SET
R
L
R
C1
C2
SET
R
L
R
C1
C2
10
SETTING
00:00 Monday
INSERT CODE
00 00 00
SETTING ADJUST
00:00 Monday
SETTING
15:30 Monday
SETTING ADJUST
10 07 08
SETTING
15:30 Monday
Procedure to be adopted
To access the parameter menu, first press the SET key and
browse through by means of the arrow keys up to TIME and DAY
visualisation.
To set the TIME and DAY, just press the screwdriver key. At this
stage the writing "ENTER CODE" will be displayed. The code is that
by default (00 00 00).
Just press the screwdriver key to confirm. Thus, the modification
of the set involved is accessed.
By means of the arrow keys, first the time is modified (first led on).
Once the time is decided, press the key SET to confirm and the
third led will be automatically on. Then, modify the day of the week
with the arrow keys.
Press the screwdriver key and the display visualisation will shift to
DAY, MONTH and YEAR setting. With the arrow keys and the first
led on, the day can be modified; with the second led on, the month
is modified and with the third, the year.
Once time, day, month and year are set, just press the screwdriver
key again to save the set values. The display will return to the initial
screen.