General notes on safety
Working with the equipment:
Caution: to avoid accidents and
injuries:
•
People who are unfamiliar with the
operating instructions are not permitted
to use the equipment. Local regulations
or bylaws may determine the minimum
age for using the device.
•
Should there be people in the water,
do not operate the equipment.
•
Take appropriate measures to keep
children away from the equipment
whilst it is running.
•
Dispose of the packaging material cor-
rectly.
•
Do not use the equipment in the vicinity
of flammable liquids or gases. Non-
observance will result in a risk of fire
or explosion.
•
Do not use for water containing abra-
sive particles such as sand. The dis-
pensing of aggressive, abrasive (grind-
ing effect), corrosive, combustible (e.g.
motor fuels) or explosive liquids, salt
water, cleaning agents and foodstuffs
is not permitted. Liquid temperature not
to exceed 35°C.
•
Store the equipment in a dry place and
out of reach of children.
Caution! To avoid damage to the
equipment and any possible person
injury resulting from this:
•
Do not work with damaged or incom-
plete equipment, or with equipment
that has been converted without the
approval of the manufacturer. Before
initial operation, have a specialist
check that the required electrical pro-
IB_270726_FGPS1100B2_CB3_FI_SE_BE_ts.indb 7
tection measures are in place.
•
Do not carry or fix the equipment by
the cable or pressure line.
•
Protect the equipment from frost and
from running dry.
•
Use only original accessories and do
not carry out conversion work on the
equipment.
•
Please read the notes in the operating
instructions on the topic of "Cleaning/
Maintenance" and "Cleaning". Any
measures above and beyond these,
particularly opening the equipment,
are to be carried out by an electrician.
In the case of repairs, always contact
our service centre.
Electrical safety:
Caution: to avoid accidents and
injuries from electric shocks:
•
After erection, the mains plug must be
freely accessible when the equipment
is in operation.
•
Before operating your new pump, have
a specialist check:
- The earthing, the protective multiple
earthing; the residual current circuit
breaking must be compliant with the
safety regulations of the energy sup-
ply company and function without
fault,
- The protection of the electrical plug
connections from the wet.
- If there is a risk of flooding, fix the
plug connections in an area that is
safe from flooding.
•
Ensure that the mains voltage matches
the specifications on the rating plate.
•
The electrical installation shall be ac-
cording to national wiring rules.
•
Connect the equipment only to a sock-
et with a residual current protection
GB
CH
7
30.09.15 10:39