Ariston 3318590 Instructions De Montage Et D'emploi page 32

installer parameters
GB
To access the installer parameters
mode, perform the following steps:
- Press the OFF button.
- Press and hold the "
the two PROGRAM "
simultaneously.
- The fi rst parameter will appear on the
display.
- Press the "
the modifi able parameters.
- Press the "
ify the default settings.
The display will fl ash to indicate that a
modifi cation has been effected.
- Press the OK button to confi rm the
modifi cation.
The display will stop fl ashing.
- To exit, press one of the operating
mode buttons:
PARAMETER
12:tO
2:Fs
1:Ot
2:Cr
13:Pb
Zn
32
" button and
" buttons
" button to scroll
" buttons to mod-
", " ", " ".
DESCRIPTION
detected room temperature adjustment
resetting of default settings
(including time and temperature)
boiler minimum operating time [1 min]
cycle frequency [6 cycles per hour]
proportional band
(ΔT between the room temperature and the set-point
temperature, above which the timer-thermostat activates/
deactivates the boiler to reach the set-point temperature
more precisely)
the number of the zone to be allocated
RANGE
- 3°C to + 3°C
1 min - 5 min
3 - 9 - 12
cycles
1 ÷ 3