Specifications - Midtronics MDX-P300 Mode D'emploi

. Slide the door off as shown in the illustration.
. Remove the discharged battery.
5. Insert a 9-volt battery as shown below, making sure the positive and
negative terminals are positioned correctly.
6. Reposition the cover and tighten the screw.

Specifications

Model:
• MDX-P00
Display:
• LCD graphics display
Temperature.Compensation:
• Tester-prompted
Operating.Temperature:
• 0 ˚F to 120 ˚F / -18 ˚C to 50 ˚C
Test.Range:
• 100–100 CCA, 100–100 SAE,
100–550 DIN, 100–900 EN,
JIS (72 numbers)
Built-in.Printer:
• Powered by battery under
test
Voltage.Range:
• Tests 12-volt batteries down
to 1 volt
Cable.Length:
• 21 in / 5. mm
slide.the.door.in.this.direction
Power.Requirements:
• Uses power of battery
under test or 9-volt battery
Voltmeter:
• 0 to 0 Vdc +/- 0.05 Vdc
Languages:
• English
• Spanish
• French-Canadian
• Japanese
Housing.Material:
• Acid-resistant ABS plastic
Dimensions:
• 9 in x  in x 2.5 in
• 20 mm x 102 mm x 65 mm
Weight:
• 1.16 lb / 99 g
21
• •