Changing The Printer Paper - Midtronics MDX-P300 Mode D'emploi

Changing.the.Printer.Paper
The MDX-P00 integrated printer is shipped with a roll of thermal printing
paper installed in the paper compartment. The roll size is 2-1/ inches
wide by 1-7/8 inch in diameter. Replacement rolls are available at most
office supply stores.
The tester uses only thermal printing paper. Below are four major office
supply stores that carry the recommended paper:
Store.
Office Depot
Office Max
Quill
Staples
To replace the paper roll:
1. Unlock the printer door by gently pressing forward on the red lever.
Remove the spent roll.
paper.
compartment
paper.
sensor
2. Place a new roll of paper in the compartment, and pull the paper for-
ward so that it extends past the serrated edge of the paper slot.
paper.feeds.from..
underneath.the.roll
Part.Number
209-65-271
2012116
856607
5126
release.lever:.press.in.this.direction
18
•
Phone
800-6-768
800-28-767
800-789-11
800-78-275
•