Using Bluetooth; What Is Bluetooth - Samsung HT-E6750W Mode D'emploi

• Use Select All to select all tracks. This cancells
your individual track selections. When you press the
RETURN ( ' ) button on your remote or select PLAY and
then press the E button, all tracks will appear on the
Music Playback screen, and the product will begin to
play all tracks from Track 001.
• Use Deselect All to deselect all selected tracks at once.
Then, select individual tracks or use Select All to select
all the tracks, and then press the RETURN ( ' ) button
on your remote or select PLAY and then press the E
button. If you do not use Select All or select individual
tracks, the Playlist will not change.
• Cancel cancells any changes you made on the Play
Select screen. When you return to the Playback screen,
the Playlist will be unchanged.
Ripping
You can rip music from a music CD to a USB
device inserted in the USB jack.
1 . Insert a USB device into the USB jack on
the front of the product, and then press the
RETURN ( ' ) button on your remote.
2 . Insert the disc you want to rip from into the
product and close the disc tray.
3 . With the Playback screen displayed, press
the TOOLS button. The Tools menu appears.
4 . Use the ▲▼ buttons to select Rip, and
then press the E button. The Rip screen
appears.
5 . Use the ▲▼ buttons to select a track, and
then press the E button. A check appears
to the left of the track.
6 . Repeat Step 5 to select and check additional
tracks.
7 . To remove a track from the list, move to the
track, and then press the E button again.
The check on the track is removed.
8 . When done, press the ► button to select
Rip, and then press the E button. The Rip
pop-up appears.
9 . Press the E button to begin the ripping
process. The Ripping Completion Bar pop-up
appears.
10 . When ripping is complete, the "Ripping
completed." message appears. Press the
E button.
HT-E6750W_XU_0222.indd 47 HT-E6750W_XU_0222.indd 47
11 . Press the RETURN ( ' ) button to go back to
the Playback screen.
| NOTE |
\ When Ripping is done, a folder called MP is created in the
USB.

Using Bluetooth

You can use a Bluetooth device to enjoy music
with high quality stereo sound, all without wires!

What is Bluetooth?

Bluetooth is a technology that enables Bluetooth-
compliant devices to easily interconnect with each
other using a short wireless connection.
• A Bluetooth device may cause a noise or
malfunction, depending on usage.
- When a part of the body is in contact with the
receiving/transmitting system of the Bluetooth
device or the Home Cinema.
- Electrical variation from obstructions caused
by a wall, corner or office partitioning.
- Electrical interference from same frequency-
band devices including medical equipment,
microwave oven and wireless LAN.
• Pair the Home Cinema with the Bluetooth
device while maintaining a close distance.
• The further the distance is between Home
Cinema and Bluetooth device, the worse the
quality is.
If the distance exceeds the Bluetooth
operational range, the connection is lost.
• In poor reception-sensitivity areas, the Bluetooth
connection may not work properly.
• The Home Cinema has an effective reception
range of up to 10 meters in all directions if
there are no obstacles. The connection will be
automatically cut off if the distance is out of this
range. Even within this range, the sound quality
may be deteriorated by obstacles such as walls
or doors.
• This wireless device may cause an electric
interference during its operation.
47
|
English
2012-02-22 오후 2:08:48 2012-02-22 오후 2:08:48