Using Bluetooth - Samsung HT-H5500 Mode D'emploi

To show the RDS signals
You can see the RDS signals the station sends on the
display.
Press the button while listening to an
RDS DISPLAY
FM station.
• Each time you press the button, the display change
to show you the following information : PS NAME
 RT  CT  Frequency
While searching, <PS NAME>
appears and then the station
PS (Program
names will be displayed.
Service)
<NO PS> appears if no signal is
sent.
While searching, <RT> appears
and then text messages the
station sends will be displayed.
RT (RadioText)
<NO RT> appears if no signal is
sent.
Station frequency (non-RDS
Frequency
service)
About characters shown in the display
When the display shows PS,or RT signals,the
following characters are used.
• The display window cannot differentiate upper case
and lower case letters and always uses upper case
letters.
• The display window cannot show accented letters,
<A,> for instance, may stands for accented <A's>
like <À, Â, Ä, Á, Å and Ã.>
PTY (Program Type) indication and
PTY-SEARCH function
One of the advantages of the RDS service is that
you can locate a particular kind of program from the
preset channels by specifying the PTY codes.
To search for a program using the PTY codes
• Before you start!
- The PTY Search is only applicable to preset
stations.
- To stop searching any time during the process,
press 5 button while searching.
- There is a time limit in doing the following steps.
If the setting is cancelled before you finish, start
from step 1 again.
- When pressing the buttons on the primary
remote control, make sure that you have selected
the FM station using the primary remote control.
RDS DISPLAY
1
PTY -
4
Press the
1. PTY SEARCH
to an FM station.
Press the
2. PTY-
code you want appears on the display.
• The display gives you the PTY codes
described to the right.
Press the
3. PTY SEARCH
PTY code selected in the previous step is still on
the display.
• The centre unit searches 15 preset FM
stations, stops when it finds the one you have
selected, and tunes in that station.

Using Bluetooth

You can use a Bluetooth device to enjoy music with
high quality stereo sound, all without wires!
What is Bluetooth?
Bluetooth is a technology that enables Bluetooth-
compliant devices to interconnect with each other
easily using a short, wireless connection.
• A Bluetooth device may hum or malfunction:
- When a part of your body is in contact with the
receiving/transmitting system of the Bluetooth
device or the Home Cinema.
- When it is subject to electrical variation from
obstructions caused by a wall, corner, or office
partitioning.
- When it is exposed to electrical interference from
same frequency-band devices including medical
equipment, microwave ovens, and wireless
LANs.
• Pair the Home Cinema with the Bluetooth device
while the two are close together.
33
- English
+
TA
2 3
PTY SEARCH PTY +
5 6
button while listening
or button until the PTY
PTY+
button again, while the