Technical Details - Petromax HK500 Mode D'emploi

• Light bulbs are to be replaced before their expected lifespan to prevent damage to the Electric
DE
Lamp or injury to persons.
EN
• Do not use light bulbs other than the ones specified. The Electric Lamp might not function properly
if other light bulbs are used, and / or it might cause damage to the Electric Lamp, serious injury to
FR
persons, and / or explosions / fire.
• Additions or modifications to the Electric Lamp are not permitted as it can cause a shortcircuit and
may lead to serious accidents, hazards, and electrical shock.
Purpose
The Petromax Electric Lamp is designed for indoor use only. Do not use outdoors. Position the lamp in
upward, vertical position and place it on a flat surface to ensure its stability during use. Keep a minimum
distance of 1 meter to all inflammable objects (curtains, net curtains, etc.) and objects sensitive to heat.

Technical Details

Operating voltage
Protection class
Light bulb
Dimensions (W x H)
Weight
Installing / replacing the light bulb
1. Before installing / replacing the bulb, switch off the Electric Lamp and pull the plug. Allow the light
bulb and the Electric Lamp to cool down.
2. Remove the two knurled screws. Remove the hood.
3. If necessary, remove the old light bulb by turning it counterclockwise. Install the new light bulb by
turning it clockwise with a clean, dry cloth. Make sure that there are no foreign objects (e.g. dirt,
dust, fingerprints) and / or liquids on the surface of the light bulb.
Using the Electric Lamp
Plug the lamp into a wall socket (230V ~ 50Hz-60Hz). Use the cord switch to turn the lamp on or off.
6
230V ~ 50Hz-60Hz
II
E2, 1 x 60W max.
6.7 in x 15.7 in
2.4 kg