Rechargeable Batteries
Prior to the use of a new unit, the rechargeable battery in the
CONTROL unit may need to be charged.
After being stored for 60 days or more, the batteries may lose
their charge. After long periods of storage, batteries should be
charged prior to use.
Charging the Batteries
1.
Connect the AC Adapter to any wall outlet or use a computer with
USB Port (computer must be powered on).
2.
Connect the larger end of the USB Cable into the AC Adapter or USB
Port on the computer (must be powered on).
3.
Connect the small end of the USB Cable into the CONTROL unit.
CONTROL Unit is fully charged when indicator light is green.
It will take about 1.5 hours to fully charge the batteries. A fully charged
battery will last approximately 12 hours at an intensity level of 10 - this is 50%
of the maximum intensity level of 20.
8