Papago GoSafe S780 Guide D'utilisation page 10

4. Settings
Press the
● Record Mode
a. Automatic Recording
b. Monitor Mode: When this mode is selected, your device
will take snapshots every second while recording.
c. Motion Detection: When this mode is selected, recording
starts when dash cam detects movement. If there is no
movement for more than 60 seconds, recording will stop
and be switched to detection mode.
This function only works when the device has a
continual power source after the vehicle´s engine is
turned off.
● Driving Safety
a.Stop Sign Recognition:The device will recognize any Stop
Sign and warn you with a beep.
b.Stop & Go: After you stop for at least 10 seconds (as for
red lights), the device will detect when the car in front has
proceeded and it will give an audio alert to remind you to
proceed driving as well.
c.Driver Fatigue Alarm: When activated, the user can setup
an alarm clock, periodically reminding you to rest. Options
available are : 30 minutes/1 hour/2 hours/4 hours/off.
d.Light Reminder : When activated, if driving in a dark
environment (such as tunnel or parking structure), it will
have an audio alert and display the light alert icon on the
screen. The alert can be turned on/off.
e.Speeding Alert
f .TPMS :GoSafe 780 supports the TireSafe D10E (sold
separately). The TireSafe D10E is a Tire Pressure
Monitoring System that allows you to view each of your
tire's pressure and temperature on your device's display.
button to enter "Settings".
English 9