Intended Use - Ribimex Ribitech PRIAF70 Traduction Des Instructions D'origine

EN – Original instructions
I. Presentation
II. Characteristics
I. PRESENTATION

1.1. Intended Use:

The sharpener is intended for sharpening metal drill bits.
Only use the sharpener for its intended use.
Any other use, outside the scope of this manual, is deemed not conform.
1.2. Not Intended Use:
Do not use for grinding or sharpening other types of bits or blades or parts.
Do not use sharpener for purposes not described in this manual.
1.3. Residual Risks
Even when the tool is used as prescribed it is not possible to eliminate all residual risk factors.
1.4. Parts List
Refer to figure and table in last page.
II. CHARACTERISTICS
Description
Reference
Model / Type
Power
Motor
Protection Class
No load speed n
o
Service
Operation time
Rest time
Drill bit capacity
Grinding wheel dimension
(external diameter x bore)
Net weight (approx.)
III. Safety instructions
IV. Getting Started
Metal Drill Bit Sharpener
PRIAF70 / 310046
2001
230V ~ 50Hz
70W
II
1600 min
S3 20%
TF: 2min
R: 8min
3mm - 10mm
58 x 40mm
1.9 kg
V. Operation
VI. Maintenance and Storage
Metal Drill Bit Sharpener
PRIAF716 / 310146
2001-B
230V ~ 50Hz
70W
II
-1
1600 min
S3 20%
TF: 2min
R: 8min
2.2 kg
-1
3mm - 10mm
8mm - 16mm
58 x 40mm
70 x 40mm
Page 12 / 30