Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Display
Meaning
Bar graph display
Value set in C0004 in %
(Lenze setting: Device utilisation
C0056)
Parameter set display
In the
Display of the parameter set activated
via digital signal
Otherwise:
Display of the parameter set active for
changing
Code number display
Subcode number display
Display of parameter value or fault message
Pos.
Key
Function
Function keys
Enable controller
Inhibit controller (CINH) or quick stop
(QSP)
Change between function bar 1
function bar 2
To the right/left in the active function
bar
Increase/decrease value
Quick change: Keep the key pressed
Store parameters if
Confirmation by
EDK82ZBC DE/EN/FR 3.1
mode:
is blinking
STOre
in the display
Description of the display elements
Explanation
Display range: - 180 % ... + 180 %
(1 mark = 20 %)
Select the individual parameter sets in the
mode in the function bar 2
Explanation
For operation with a function module, the
X3/28 terminal must be set to HIGH level.
Configuration in C0469; inactive if the
standard device is running in manual mode
(C0410/17)
↔
The active function is framed.
Only blinking values can be changed.
Operation
6
51
Publicité
Chapitres
Table des Matières
