Philips HR2204 Guide D'utilisation page 11

Problem Possible cause
The light of the
selected program You have not
is on, but the pressed the start/
appliance does stop button.
not work.
The overflow sensor
is dirty.
The appliance
makes alarm
You have put
sounds at the
ingredients over the
beginning.
MAX indication in
the jug.
The food is burnt on
The appliance
the bottom of the
stops working
jug.
and makes alarm
sounds during
You have started
the cooking
the program without
process.
adding ingredients
and/or liquid.
The motor unit
is detached from
the jug during the
The appliance
cooking process,
stops working
as too many
during the
ingredients are
cooking process.
put in the jug or
the ingredients are
oversized.
You have put
ingredients over the
MAX indication.
You have selected
The appliance
the wrong program
overflows.
when preparing
milk-based soup.
The ingredients
used are not
recommended.
Solution
Press the start/stop button.
Clean the overflow sensor.
Remove some of the ingredients
(Follow the user manual instruction or
the recipe booklet).
Remove the ingredients and clean the
burnt area. Follow the recipe booklet
to restart the program.
Add the ingredients and/or liquid
before starting the program (Follow
the user manual instruction or the
recipe booklet).
Remove some of the ingredients
and cut the ingredients into
2 x 2 x 2 cm / 3/ 4 x 3/ 4 x 3/ 4 in pieces
(Follow the user manual instruction or
the recipe booklet).
Remove some of the ingredients
(Follow the user manual instruction or
the recipe booklet).
Select the milk-based soup program
(Follow the user manual instruction or
the recipe booklet).
Follow the user manual instruction or
the recipe booklet.
ENGLISH
13