Roadstar HRA-1550USMP Manuel D'instructions page 5

Pause
 To stop a track temporarily, press Play/Pause Button. The disc will pause, LED Display
flashing at the current track position. The Play indicator light up.
To resume play, press Play/Pause Button again.
FAST FORWARD AND FAST BACKWARD
The BACK/NEXT function can be used at any time during playing.
 Press NEXT button once to select next track. If it is the last track of the disc, the player will
move to track1.
 Press BACK button once to select last track. If it is the first track of the disc, the player will
skip to the last track. It will stop playing automatically after finish playing the last track, and
the PLAY/PAUSE Indicator will not light. (If you want it continue to play, please press PLAY/
PAUSE button again. Then it will play from the first track.)
If there are many tracks in disc (MP3/WMA) or USB or SD card, you can press "10+
(FOLDER)" button or "10- (FOLDER)" button to select tracks quickly when it is playing. You
can press "10+ (FOLDER)" button or "10- (FOLDER)" button to select file to play tracks
when it stops playing. For example, if it displays "F 01", it starts to play the first track that in
the first file.
 Press "10+" or "10-" button to skip ten tracks forwards or backwards to play tracks when
it is playing. When it is in last few tracks, press "10+"button once, it will skip to the last
track.
When it stops playing, press "10+" or "10-" button every time, it will skip to next file or last
file to play tracks.
PROGRAM TO PLAY
 Press "STOP" button to stop playing, it will display the total number of the tracks.
 Press "PROGRAM" button once, it will display "P 01".
Press "BACK" or "NEXT" button to choose the tracks that you want to listen to, and press
"PROGRAM" button once again.
At this time, the display will show "P02", then you can program 2nd track.
(It can program 20 tracks at most if in CD format. It can program 99 tracks at most if in
MP3/WMA format)
 Press PLAY/PAUSE button, Play indicator will light, and it will start to play from the first
track that you choose.
 After finish playing all the programmed tracks that you choose, the CD will stop automatically.
 If you want to cancel the tracks that you choose, press STOP button.
REPEAT, BACK, NEXT function can also work after program.
English
5
Note: 10- and 10+ Button cannot work when playing the programmed tracks.
REPEAT PLAYING
You can set repeat playing the disc or the tracks that you choose.
REPEAT PLAYING ONE TRACK
When CD/USB / SD CARD is playing:
 Press REPEAT button, the REPEAT Indicator glitters. Then a selected song will be continuous
 The tracks you choose will repeat playing till you press STOP button to make REPEAT
REPEAT PLAYING ALL TRACKS
When CD/USB/ SD is playing:
 Press REPEAT button twice, REPEAT indicator will be on all the time.
REPEAT PLAYING PROGRAMED TRACKS
 Choose the tracks that you want to program, press PLAY/PAUSE button to play programmed
 Press REPEAT button once, it will repeat playing the track that you choose, REPEAT indicator
 Press REPEAT button twice, it will repeat playing all the programmed tracks and the
Note: 10- and 10+ Button cannot work when repeat playing the programmed tracks.
USING OF USB/SD
 Insert an USB/MP3 player/SD/MMC card first.
 Press CD/USB function switch, then press CD/USB button to select to play USB or SD/
English
6
playing until you press STOP button to make the REPEAT Indicator off or press REPEAT
button twice.
indicator out, or press Repeat button twice to make REPEAT indicator out.
It will repeat playing the tracks that in the disc/USB/SD till you press STOP button to make
REPEAT indicator out, or press REPEAT button once to make REPEAT indicator out.
tracks from the first one.
will flash. The programmed track will be repeat playing till you press STOP button twice, or
press REPEAT button twice
REPEAT indicator will be on all the time. All the programmed tracks will be repeat playing till
you press STOP button once, or press REPEAT button once.
MMC card.