Dimmer Speed; Color Balance; Preset Select; Preset Sync - Chauvet Professional Maverick MK3 Wash Manuel D'utilisation

Dimmer speed

To set the dimmer speed, do the following:
1. Navigate to the Setup
2. Use <UP> or <DOWN> to select Dimmer Speed, or touch the display where it says Dimmer
Speed.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Smooth or Fast, or touch the display where
it says the desired option.
5. Press <ENTER>.

Color balance

To set the maximum values of a given color in the mix, follow the instructions below:
1. Navigate to the Setup
2. Use <UP> or <DOWN> to select Color Balance, or touch the display where it says Color
Balance.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Use <UP> or <DOWN>, to select the color value to be changed, from Red, Green, Blue, or White,
or touch the display where it says the desired option.
5. If using the buttons instead of the touchscreen, press <ENTER>.
6. Set the color value with one of the following methods:
• Type the desired value using the number pad that shows on the touchscreen display.
• Use <UP>, <RIGHT>, <DOWN>, or <LEFT> to increase or decrease the value.
7. Press <ENTER>.
8. Repeat steps 4–7 until the color balance is set as desired.

Preset select

This option saves three different preset menu option configurations. To record and set these presets, follow
the instructions below:
1. Navigate to the Setup
2. Use <UP> or <DOWN> to select Preset Select, or touch the display where it says Preset Select.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select the presets, from PRESET A, PRESET B,
or PRESET C, or touch the display where it says the desired option.
5. Press <ENTER>.
6. The product will reset. Any changes made to the menu options will be saved to this preset.
• Default is PRESET A. If you make changes inside PRESET A, those changes are
saved to PRESET A without having to do anything.
• To create a new preset, highlight and select PRESET SELECT. Highlight PRESET B
or PRESET C and press <ENTER>. When you make that selection, the product will
reset automatically. Go back and make the changes you need to make in the menu.
This will automatically save to the preset you are in.

Preset sync

To sync all menu presets to other Maverick MK3 Washes, follow the instructions below:
1. Connect all Maverick MK3 Washes via DMX cable.
2. Navigate to the Setup
3. Use <UP> or <DOWN> to select Preset Sync, or touch the display where it says Preset Sync.
4. If using the buttons instead of the touchscreen, press <ENTER>.
5. Select YES or touch the display where it says the desired option.
6. Press <ENTER>.
• To sync other Maverick MK3 Washes, you connect those products by a DMX cable.
• The product can be in any control mode except WDMX. ArtNet, DMX, sACN are all
acceptable.
• All menu options are transferred, including the DMX address. Only the IP address
in not affected in the other products.
Page 57 of 323
menu.
menu.
menu.
menu.
Maverick MK3 Wash User Manual Rev. 7
Operation