Beam Correction; Preset Select; Preset Sync; Reset Functions - Chauvet Professional Maverick MK2 Profile Manuel D'utilisation

Beam correction

To achieve a flat field while using the shutters, use the beam correction feature. To do so, follow the
instructions below:
1. Navigate to the Settings
2. Use <UP> or <DOWN> to select Beam Correction, or touch the display where it says Beam Correction.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Select YES, or touch the display where it says the desired option.
5. Press <ENTER>.
When Beam Correction is activated, Gobo Wheel 1 is offset by one set of values in the
DMX configuration.

Preset select

This option saves three different preset menu option configurations. To record and set these presets,
follow the instructions below:
1. Navigate to the Settings
2. Use <UP> or <DOWN> to select Preset Select, or touch the display where it says Preset Select.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select the presets, from PRESET A, PRESET B,
or PRESET C, or touch the display where it says the desired option.
5. Press <ENTER>.
6. The product will reset. Any changes made to the menu options will be saved to this preset.
• Default is PRESET A. If you make changes inside PRESET A, those changes are saved
to PRESET A without having to do anything.
• To create a new preset, highlight and select PRESET SELECT. Highlight PRESET B or
PRESET C and press <ENTER>. When you make that selection, the product will reset
automatically. Go back and make the changes you need to make in the menu. This will
automatically save to the preset you are in.

Preset sync

To sync all menu presets to other Maverick MK2 Profiles, follow the instructions below:
1. Connect all Maverick MK2 Profiles via DMX cable.
2. Navigate to the Settings
3. Use <UP> or <DOWN> to select Preset Sync, or touch the display where it says Preset Sync.
4. If using the buttons instead of the touchscreen, press <ENTER>.
5. Select YES or touch the display where it says the desired option.
6. Press <ENTER>.
• To sync other Maverick MK2 Profiles, you connect those products by a DMX cable.
• The product can be in any control mode except WDMX. ArtNet, DMX, and sACN are
all acceptable.
• All menu options are transferred, including the DMX address. Only the IP address
in not affected in the other products.
• Connect Maverick MK2 Profiles only.

Reset functions

To reset the pan, tilt, or all functions as if from startup:
1. Navigate to the
2. Use <UP> or <DOWN> to select Reset Function, or touch the display where it says Reset
Function.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Use <UP> or <DOWN> to select the function to reset, from Pan/Tilt, Iris/Prism, Color/
CMY+Blade, Gobo/Gobo Rotate, Frost, or All, or touch the display where it says the desired
option.
5. If using the buttons instead of the touchscreen, press <ENTER>.
6. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (do not reset) or YES (reset), or touch
the display where it says the desired option.
7. Press <ENTER>.
Page 21 of 209
menu.
menu.
menu.
Settings menu.
Maverick MK2 Profile User Manual Rev. 3
Operation