Blackout On Pan/Tilt Movement; Blackout On Color Movement; Blackout On Gobo Movement; Touchscreen Calibration - Chauvet Professional Maverick MK2 Profile Manuel D'utilisation

Operation

Blackout on pan/tilt movement

To set whether the product will black out during pan or tilt movement, follow the instructions below:
1. Navigate to the Settings
2. Use <UP> or <DOWN> to select BL. O. P/T Move, or touch the display where it says BL. O. P/T
Move.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (do not black out) or YES (black out
during movement), or touch the display where it says the desired option.
5. Press <ENTER>.

Blackout on color movement

To set whether the product will black out during pan or tilt movement, follow the instructions below:
1. Navigate to the Settings
2. Use <UP> or <DOWN> to select BL. O. Color Move, or touch the display where it says BL. O.
Color Move.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (do not black out) or YES (black out
during movement), or touch the display where it says the desired option.
5. Press <ENTER>.

Blackout on gobo movement

To set whether the product will black out during pan or tilt movement, follow the instructions below:
1. Navigate to the Settings
2. Use <UP> or <DOWN> to select BL. O. Gobo Move, or touch the display where it says BL. O.
Gobo Move.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (do not black out) or YES (black out
during movement), or touch the display where it says the desired option.
5. Press <ENTER>.

Touchscreen calibration

If the touchscreen is not responding correctly, it may need to be calibrated. To do so:
1. Navigate to the Settings
2. Use <UP> or <DOWN> to select Calibration, or touch the display where it says Calibration.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (do not calibrate) or YES (calibrate), or
touch the display where it says the desired option.
5. Press <ENTER>.
6. Follow the instructions, touching the points as they appear on the display.

Touchscreen lock

To lock or unlock the touchscreen for the control panel, do the following:
1. Navigate to the Settings
2. Use <UP> or <DOWN> to select Touchscreen Lock, or touch the display where it says
Touchscreen Lock.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (display will respond to touch) or YES
(display will not respond to touch), or touch the display where it says the desired option.
5. Press <ENTER>.
Maverick MK2 Profile User Manual Rev. 3
menu.
menu.
menu.
menu.
menu.
Page 18 of 209