Gettin G R Ead Y To Instal L The Refrigerator - Samsung RF22 Serie Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Setting up your French Door
Refrigerator
GETTIN G R EAD Y TO INSTAL L THE
REFRIGERATOR
Congratulations on your purchase of this Samsung
French Door Refrigerator.
We hope you enjoy the state-of-art features and
Selecting the best location for the
refrigerator
A location with easy access to a water supply.
A location without direct exposure to sunlight.
A location with a leveled fl oor.
A location with enough space for the refrigerator
doors to open easily.
A location that allows suffi cient space to the
right, left, back and top for air circulation.
A location that allows you to move the
refrigerator easily if it needs maintenance or
service.
If the refrigerator does not have enough space, the
internal cooling system may not work properly.
If your refrigerator has an ice maker, allow extra
space at the back for the water line connections.
When you install the refrigerator next to a fi xed wall,
you need a minimum clearance of 3 ¾" (95 mm)
between the refrigerator and wall to allow the door
to swing open.
First thing! Make sure that you can easily move
your refrigerator to its fi nal location by measuring
doorways (both width and height), thresholds,
ceilings, stairways, etc.
10_ setting up
The following chart details the exact height and
depth of this Samsung French Door Refrigerator.
Allow clearance to the right, left, back and top
when installing. This will help reduce power
consumption and keep your energy bills lower.
Do not install the refrigerator where the
temperature will go below 50 ºF (10 ºC).
Do not locate the refrigerator where it may
become wet.
29 27/32" (758 mm)
35 25/64" (950 mm)
35" (889 mm)
1 3/8" (36 mm)
1 3/8" (34 mm)
When moving your refrigerator
To prevent fl oor damage, be sure the front
adjusting legs are in the up position (above
CAUTION
the fl oor). Refer to 'Adjusting the Level' in
the manual (on page 15).
Control Lever
Flat-blade
screwdriver(-)
48 5/8" (1234 mm)
47" (1194 mm)

Publicité

Table des Matières
loading

Table des Matières