LG 32LC2D Mode D'emploi page 29

/ DTV)
- This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings.
When connecting with a D-sub 15 pin cable
AUDIO IN REMOTE
(RGB/DVI) CONTROL
RGB IN
(PC / DTV)
2
(R) AUDIO (L)
When connecting with a HDMI to DVI cable
AUDIO IN REMOTE
(RGB/DVI) CONTROL
RS-232C IN
RGB IN
(PC / DTV)
1
Connect the DVI output of the PC to the HDMI/DVI IN jack on the set.
Connect the audio outputs of the PC to the AUDIO (RGB/DVI) jack on the set.
2
Turn on the PC and the set.
3
Select HDMI/DVI input source with using the INPUT button on the remote control.
4
AUDIO IN
(RGB/DVI)
RGB IN
• If the PC has a DVI output and no HDMI output, a separated audio connection is necessary. (PC / DTV)
• If the PC does not support Auto DVI, you need to set the output resolution appropriately. To get the
best picture quality, adjust the output resolution of PC graphics card's output resolution to
1024x768, 60Hz.
REMOTE REMOTE
RGB IN RGB IN
CONTROL IN CONTROL IN
AUDIO (RGB/DVI) AUDIO (RGB/DVI)
RGB (PC DTV)
/
1
PC
RGB-PC OUTPUT
HDMI/DVI IN HDMI/D VI IN
REMOTE
CONTROL RGB IN
AUDIO (RGB/DVI)
RGB (PC
RGB (PC / DTV)
PC Setup
Connect the RGB output of the PC to the RGB
1
(PC/DTV) jack on the set.
Connect the PC audio outputs to the AUDIO
2
(RGB/DVI) jack on the set.
3 Turn on the PC and the set.
4
Select RGB-PC input source with using the
INPUT button on the remote control.
RGB IN RGB IN
DIGIT DIGITAL A AL AUDIO UDIO RS-232C IN RS-232C IN
(CONTROL OL & SER (CONTR SERVICE) VICE)
OUT OUT
AUDIO (RGB/DVI) AUDIO (RGB/DVI)
OPTICAL
RGB (PC
1
(R) AUDIO (L)
DVI-PC OUTPUT
REMOTE
CONTROL IN
DTV)
/
REMOTE REMOTE
CONTROL IN CONTROL IN
DTV)
/
2
PC
Installation
29