Installation Of Stove With Swivel Base - RAIS/attika New PILAR Manuel D'utilisateur

English
The stove is placed on fireproof material.
When you choose where to set up your RAIS wood burning stove, you should consider
the heat distribution to the other rooms. This will enable you to get the best use out of
your stove.
The stove should be set up at a safe distance from inflammable materials.
See the manufacturer's plate on the wood burning stove.
Upon receiving the stove must be inspected for defects.
NOTE!!
This appliance may only be installed by a qualified RAIS dealer/installer.
See www.rais.com for dealer list.

Installation of stove with swivel base

The stove is installed as shown in relation to the back wall.
Make sure the marker (FRONT) is perpendicular to the rear wall (shown as 90 °).
The stove with its center line (CL) is now in its far left position (33 °).
The marker indicates the center line of the swivel range.
The stove can rotate 33 ° to either sides of the center line.
68
attika
RAIS/ - User manual for New PILAR / PILAR 13
B
B