Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Quick Installation
1U Rackmount Installation
The NG8POE is shown in the installation diagram. The other two models can also be rack
mounted.
1
Attach the mounting brackets to each side of the switch with the included screws. Be
sure the mounting bracket "ears" are facing forward.
1
2
Mount the switch with user-supplied rackmount hardware.
Note: The user must determine the fitness of the rackmount hardware to hold the unit in the rack
before installation.
2
3
Connect the switch to a properly
grounded outlet. The Power LED will
illuminate when the switch turns on.
4
Connect network cables to the network
switch.
16-08-358-9335EB.indb 7
3
4
7
8/23/2016 2:45:42 PM
Publicité
Table des Matières
