Faber GALILEO SMART Manuel D'utilisation page 8

7. CONTROLS
its functions. All the Digits show
At this point the hob is on but all the cooking areas and the hood are at zero power.
Warning
button.
Warning: The functions that can be selected will always be the ones that are
illuminated/visible on the control panel, and these will always be the only ones that
can be activated.
Instructions for the installer: Check the hob power setting and change it if
necessary. See the paragraph " Installer Menu (Hob power settings) ".
The hob is pre-set as standard to an absorption level of 7.4 Kw.
8
for 2 seconds to turn the hob on and activate
.
and the Timer digits show " C L ".