Faber GALILEO SMART Manuel D'utilisation page 23

E6
E7
E8
E9
EA
EH
TC = TOUCH CONTROL
UI = USER INTERFACE
NTC = TEMPERATURE SENSOR
The power supply
voltage does not fall
within the range (voltage
and/or frequency). The
cooking area cannot be
activated
TC internal error. The
cooking areas are
deactivated.
Suction hood
malfunction.
Cooking area
temperature sensor
error. The corresponding
TC internal error. The
Temperature sensor
blocked. The
corresponding cooking
The power supply voltage
does not fall within the
range (see technical data for
details).
Internal error in generator
circuits.
-
The suction hood is blocked.
Faulty fan or electronic
module.
The temperature sensor
circuit is open or there is a
short-circuit.
-
No change in temperature
(min. 10 K / 5 min.) after
activation of the cooking
area.
Check the mains voltage.
Replace the module.
Replace the module.
Clean and remove any
blocks.
Replace the module.
Replace the inductor.
Replace the generator.
Replace the inductor.
23