Description Of Symbols; General Safety - Silverline 444658 Mode D'emploi

GB
Introduction
Thank you for purchasing this Silverline tool. This manual contains information necessary
for safe and effective operation of this product. This product has unique features and,
even if you are familiar with similar products, it is necessary to read this manual carefully
to ensure you fully understand the instructions. Ensure all users of the tool read and fully
l.
understand this manua

Description of Symbols

The rating plate on your tool may show symbols. These represent important information
about the product or instructions on its use
Wear hearing protection
Wear eye protection
Wear breathing protection
Wear head protection
Wear hand protection
Read instruction manual
Risk of electrocution
Risk of fire!
DO NOT use in rain or damp environments!
Class I construction (protective earth)
Caution!
Risk of explosion!
NO open flames!
NO smoking!
Indoors use only!
T-130˚
Conforms to relevant legislation and safety standards
Environmental Protection
Waste electrical products should not be disposed of with household waste.
Please recycle where facilities exist. Check with your local authority or
retailer for recycling advice
Technical Abbreviations Key
V
Volts
~ Alternating current
A Ampere
Hz
Hertz
W, kW Watt, kilowatt
Ah Amp hour
4
Original Instructions
Specification
Input voltage range: .............................................................10 -15V (12V) DC
Max input current: ...............................................200A (250A peak, 1 second)
Output voltage: ..................................................................................... 230V~
Output frequency: ...................................................................................50Hz
Waveform:..................................................................................Modified Sine
USB sockets output: ..................................................................5V DC 500mA
Inverter protection class: ........................................................................
Mains sockets: ..................................................................................Universal
Mains socket protection class: ..............................................................
Max continuous output power: .................................................. 2000W (8.7A)
Surge capacity/time: .................................................... 4000W for one second
Efficiency: .............................................................................................>88%
No load current draw: ........................................................................... <1.0A
Low voltage alarm:......................................................................... 10.5±0.5V
Low voltage shutdown: ..................................................................... 10±0.5V
Recommended ambient temperature: ............................................... 10-32°C
Protection features: ......................................................Input over voltage (16V)
Ingress protection: ...................................................................................IPX0
Supplied 12V cables length: ........................................................1m (approx.)
Dimensions (L x W x H):...................................................330 x 200 x 100mm
Weight: ...................................................................................................4.8kg
As part of our ongoing product development, specifications
of Silverline products may alter without notice.

General Safety

WARNING Read all safety warnings and all instructions. Failure to follow the warnings
and instructions may result in electric shock, fire and/or serious injury.
WARNING: This device is not intended for use by persons (including children) with
reduced, physical or mental capabilities or lack of experience or knowledge unless
they have been given supervision or instruction concerning use of the device by a
person responsible for their safety. Children must be supervised to ensure that they do
not play with the device.
Save all warnings and instructions for future reference.
1) Work area safety
a) Do not operate electrical devices in explosive atmospheres, such as in the
presence of flammable liquids, gases or dust. Electrical devices create sparks which
may ignite the dust or fumes.
2) Electrical safety
a) Electrical plugs must match the outlet. Never modify the plug in any way. Do
not use any adapter plugs with earthed (grounded) devices. Unmodified plugs and
matching outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces, such as pipes, radiators,
ranges and refrigerators. There is an increased risk of electric shock if your body is
earthed or grounded.
c) Do not expose non-waterproof electrical devices to rain or wet conditions. Do not
submerge non-pressure-rated devices in water. Water entering an electrical device
will increase the risk of electric shock.
d) Do not abuse the power lead. Never use the lead for carrying, pulling or
unplugging the device. Keep lead away from heat, oil, sharp edges or moving
parts. Damaged or entangled power leads increase the risk of electric shock.
e) If operating an electrical device in a damp location is unavoidable, use a residual
current device (RCD) protected supply. Use of an RCD reduces the risk of electric
shock.
3) Personal safety
a) Stay alert, watch what you are doing and use common sense when operating an
electrical device. Do not use potentially dangerous electrical devices while
you are tired or under the influence of drugs, alcohol or medication. A moment of
inattention while operating potentially dangerous devices may result in serious personal
injury.
Input low voltage
Output overload
Output short-circuit
Overheat