ADEO SCREEN INSUPERIOR PRININ-SUP-XXXXX Manuel D'installation page 8

ENGLISH – Motorized screen user manual
Our screens are suitable for indoor use at normal temperature (20 - 25 °C) and humidity conditions. Special precautions are necessary for outdoor use, especially as regards
temperature levels and the presence of dust. Exposure to temperatures of over 50 °C can cause permanent deformation of the screen's flatness, or the screen to come away
from the roller.
Avoid prolonged exposure of the projection screen to solar light to prevent yellowing of the same (ensure that exposure to solar light does not cause the screen to reach said
temperature level).
Since electrostatic charge tends to accumulate on the projection screen (which is made of PVC), attracting dust, excessive dustiness in the projection environment can
deteriorate the optical quality of the screen (see projection screen cleaning instructions).
WARNING: Do not manually force the screen's unrolling: this could result in the motor being damaged or the screen's case to come away from the wall mount brackets.
Do not allow children to play with the screen's control panel. Keep remote control out of children's reach.
Monitor screen movement and allow no-one near it until it is completely closed.
The following operations: blocking, preventing or forcing the screen's movement, hanging or swinging from it, adding or applying any object to the screen or backdrop,
modifying the screen's structure – are strictly forbidden and could result in damages to the screen's rolling system and ensuing hazard to persons and things.
Screens and their projection surfaces are delicate and must be cleaned with great care, according to the following instructions:
Never use solvents, chemical or abrasive products, or pointed tools to clean the surface.
Avoid contact with other materials (varnishes, inks etc) as they might be impossible to remove from the canvas.
FABRIC VISION, REFERENCE, HELIOS FABRIC VISION, REFERENCE, HELIOS: Remove dust from the case with a soft, clean cloth and a non aggressive detergent as necessary.
FABRIC FABRIC VISION, REFERENCE, HELIOS VISION, REFERENCE, HELIOS
Clean the projection screen with a soft, clean, damp cloth, and a neutral or alcohol-base detergent as necessary. Since rubbing the screen with a cloth during cleaning operations can cause electrostatic
charge to accumulate, we recommend the subsequent application of an antistatic liquid with a clean cloth, to avoid dust being attracted again
GENERIC PROFIL GENERIC GENERIC GENERIC PROFIL PROFILE E E E : : : : Remove dust from the case with a soft, clean cloth and a non aggressive detergent as necessary PROFIL
VELVET PROFILE: Clean profile with a soft clean cloth, or a brush with soft, antistatic bristles. A vacuum-cleaner brush may be used, provided its bristles are soft and perfectly clean. VELVET PROFILE VELVET PROFILE VELVET PROFILE
STRUCTURE and ANCHORING BRACKETS: The state of the product and the anchoring capacity of its brackets must be checked regularly. In case of canvas deformation or rips, or loosening of structural STRUCTURE and ANCHORING BRACKETS:
STRUCTURE and ANCHORING BRACKETS: STRUCTURE and ANCHORING BRACKETS:
components such as brackets or screws, action must be taken immediately to clear the area around the screen and avoid hazard to people and things, replace the defective component and restore the
product's functionality.
WARNING: When installing the screen use plugs and screws suitable for the screen's weight and for the type of wall or ceiling on which the mount brackets are to be fixed, based on the WARNING:
WARNING: WARNING:
following criteria
Screen width view a Screen width Screen width Screen width view area view a view a
Overall weight Overall weight Overall weight Overall weight
1. Prepare a hole for the screen as described in Fig. 1.
2. Install brackets as described in Fig. 2, adhering to distances given in Fig. 1.
3. Install screen as described in Fig. 3 to 7 of next page.
5. Finish installation by applying plugs as per Fig. 10 and 11.
Made by Adeo Screen sp. Z o.o. (Polska) Specifications are subject to change without notice. E&OE
Doc: INSUPERIOR Installation Manual rev3 | 30.01.2015
Please verify that you are working with the latest revision of this document before specifying your screen.
05 05 05 05 WARNINGS AND RECOMMENDATIONS FOR CORRECT USE WARNINGS AND RECOMMENDATIONS FOR CORRECT USE
WARNINGS AND RECOMMENDATIONS FOR CORRECT USE WARNINGS AND RECOMMENDATIONS FOR CORRECT USE
06 CLEANING AND MAINTENANCE 06 06 06 CLEANING AND MAINTENANCE CLEANING AND MAINTENANCE CLEANING AND MAINTENANCE
07 07 07 07 INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS
rea rea up to cm rea up to cm up to cm up to cm 200 200 200 200 250 250 250 250 300 300 300 300 350 350 350 350
Kg 61 Kg 61 Kg 61 Kg 61 Kg 71 Kg 71 Kg 71 Kg 71 Kg 79 Kg 79 Kg 79 Kg 79 Kg 87 Kg 87 Kg 87 Kg 87
D = Overall Width screen
H = Hole Width
I = Hole Depth
L = Minimum size for installation
400 400 400 400 450 450 450 450
Kg 93 Kg 93 Kg 93 Kg 93 Kg 110 Kg 110 Kg 110 Kg 110
= See dettail of your screen
= Overall Width screen – 20mm / 0.78"
= 200mm / 7.87"
= 200mm / 7.87"
Page 8