Fagor FSE 8214 Mode D'emploi page 10

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 5
0
Identification
Identify your washer-dryer model ("a", "b" or "c")
by comparing the control panel with the illustrations.
1
Installation
1.1 Unpacking (1.1.1, 1.1.2 and 1.1.3). Remove the
bolts and the fixing and blocking elements used
for transport.
1.2 Connection to the water mains (1.2.1, 1.2.2
and 1.2.3). If the washer-dryer has a hot water
intake, connect the hose with a red connector to
the hot water intake (1.2.4). Always use the new
hose supplied, removing
any previously used hoses.
1.3 Drain.
IMPORTANT! Place the hose in the
drain in accordance with the measurements
shown on the drawing.
1.4 Levelling. Correctly level the washer-dryer to
prevent any noise or shifting. The recommended
procedure is as follows: 1. Position the rear legs
and fix them in place (1.4.1); 2. Place the
washer-dryer in its final location (1.4.2); 3. Position
the front legs and fix them in place (1.4.3).
1.5 Electrical connection. Take the electrical data
on the reference plate into account.
1.6 Installation under a worktop. If you need to
remove the worktop to recess-mount the
washer-dryer, contact your dealer or the Technical
Assistance Service.
For recess-mounted washer-dryers, the electrical
plug must be accessible after installation.
Recess dimensions are 600x600x850.
2
Operation
2.1 Apertura de la escotilla. Abre la escotilla.
2.1 Opening the loading door. Open the loading
door.
2.2 Detergent and additives. Sort items by colour,
soil and fabric type before loading the washer-
dryer.
The detergent drawer has the following
compartments: wash
fabric softener
All the washer-dryers are designed to use
detergent powder (2.2.2).
All the washing machines are designed to use
powder detergent (2.2.2). If you wish to use liquid
detergent (2.2.3), you will see a blue tab for this
purpose in the wash compartment. Pull it
outwards as far as it will go, then release it. It will
remain in vertical position (2.2.4), this will prevent
10
, prewash
and
.
the liquid detergent from running out. To use
powder detergent again, place the blue tab in
horizontal position and push it back as far as it will
go to open the flap (2.2.5).
Remember you must not exceed the MAX level
marked on the fabric softener compartment.
2.3 Switching on and selecting the wash and
dry programme. Select the wash programme
(2.3.1) using the control panel, after consulting the
programme chart (page 12). To select the drying
time, press the drying button
will appear on the display and will increase
according to how you press the button:
Mode 1 -> hold down the button the drying
time increases in steps of 10 minutes (in "a"
models from 10 min to 180 min and in models
"b-c" from 20 min to 200 min).
Mode 2 -> press and release the button the time
increases 1 minute each time the button is
pressed.
2.4 Selecting the spin speed. You may choose a
spin drying speed or cancel out spin drying
(2.4.1, 2.4.2). If you select Anti-crease
the wash process will pause before the final spin
and the clothes will be left submerged in water.
Press
to run the final spin dry.
AVERAGE RESIDUAL
MAXIMUM SPIN SPEED OF THE
DAMPNESS* (%)
600
80
COTON programmes
80
SYNTHETIC programmes
100
WOOL programmes
100
QUICK programme
*
Residual dampness: the degree of dampness of the
clothes on completion of the spin dry phase
2.5 Additional functions:
. Reduces creasing.
- Easy ironing
- Rinse plus
. Provides extra protection for
clothes worn by children and people with
sensitive skin
- Save time
. Provides extra protection for
clothes worn by children and people with
sensitive skin. Press the wash time reduction
button up to three times to reduce the duration of
the selected wash programme. The reduced wash
programme time will appear on the display.
2.6 Delayed start
. This delays the start of
washing.
2.7 Steam Function
. This function can only be
selected on appliances that have a button with the
symbol
, after previously selecting a drying
programme. Press the corresponding button if you
wish to prevent your more sensitive garments from
creasing. Do not load any more than 4 shirts or
1Kg at a time.
e n g l i s h
(2.3.2). The time
(2.4.3)
MACHINE (r.p.m)
800 1000 1200 1400
71
62
53
52
70
70
70
70
90
90
90
90
90
80
80
80

Publicité

Table des Matières
loading

Table des Matières