Decommissioning; Switching Off The Appliance; Taking The Appliance Out Of Service; Disposing Of The Appliance - Atag KD80140CD Mode D'emploi

Decommissioning

The temperature display indicates power failure
warmest temperature reached during the power failure
appears in the temperature display.
The freezer temperature rose too high over the last hours or
→
days due to a power failure or power interruption. When the
power interruption is over, the appliance will continue to
operate in the last temperature setting.
u To cancel the display of the warmest temperature: press
Fig. 2 (6) .
alarm button
u Check the quality of the food. Do not consume spoiled food.
Do not re-freeze thawed food.
DEMO shines in the temperature display.
The demo mode is activated.
→
Please contact the after-sales service (see Maintenance).
u
The outer surfaces of the appliance are warm*.
→ The heat of the refrigeration circuit is used to prevent
condensate from forming.
This is normal.
u
The temperature is not cold enough.
The door of the appliance is not properly closed.
→
Close the door of the appliance.
u
Insufficient ventilation.
→
Clear ventilation grilles.
u
→ The ambient temperature is too high.
Solution: (see 1.2) .
u
The appliance was opened too frequently or for too long.
→
Wait to see whether the appliance reaches the required
u
temperature by itself. If not, please contact the after sales
service (see Maintenance).
Too much fresh food was placed inside without Fast-
→
Freeze.
Solution: (see 5.8)
u
→ The temperature is incorrectly set.
Set the temperature to a colder setting and check after 24
u
hours.
→ The appliance is too close to a source of heat (stove, heater
etc).
Change the position of the appliance or the source of heat.
u
→ The appliance was not inserted properly into the recess.
Check whether the appliance was inserted correctly and
u
the door closes properly.
8 Decommissioning

8.1 Switching off the appliance

u Press the On/Off button
dark. Release button.
w If the appliance cannot be switched off, the child lock func-
tion is active (see 5.1) .

8.2 Taking the appliance out of service

u Empty the appliance.
u Pull out the power plug.
u Clean the appliance (see 6.2) .
u Leave the door open to prevent odour.
22
Fig. 2 (1) until the display goes

9 Disposing of the appliance

. The
The appliance contains some reusable materials
and should be disposed of properly - not simply
with unsorted household refuse. Appliances which
are no longer needed must be disposed of in a
professional and appropriate way, in accordance
with the current local regulations and laws.
When disposing of the appliance, ensure that the refrigeration
circuit is not damaged to prevent uncontrolled escape of the
refrigerant it contains (data on type plate) and oil.
u Disable the appliance.
u Pull out the plug.
u Cut through the connecting cable.
* Depending on model and options