Controls And Displays; Operating And Control Elements; Temperature Display; Putting Into Operation - Atag KD80140CD Mode D'emploi

Controls and displays

Danger of food poisoning:
Do not consume food which has been stored
-
too long.
Danger of frostbite, numbness and pain:
Avoid lasting skin contact with cold surfaces
-
or refrigerated/frozen food or take protective
steps, e.g. wear gloves. Do not consume ice
cream, water ice or ice cubes immediately
and do not consume them too cold.
Danger of injury and damage:
Hot steam can lead to injury. Do not use elec-
-
trical heating or steam cleaning equipment,
open flames or defrosting sprays to defrost.
Do not use sharp implements to remove the
-
ice.
Please observe the specific information in
the other sections:
DANGER identifies a situation involving direct
danger which, if not obviated, may
result in death or severe bodily
injury.
WARNING identifies a dangerous situation
which, if not obviated, may result in
death or severe bodily injury.
CAUTION identifies a dangerous situation
which, if not obviated, may result in
minor or medium bodily injury.
NOTICE identifies a dangerous situation
which, if not obviated, may result in
damage to property.
Note identifies useful information and tips.
3 Controls and displays

3.1 Operating and control elements

Fig. 2
(1) On/Off button

(2) Temperature display

(3) "+/-" setting button
(4) Fast-Freeze button
(5) Fast-Freeze symbol
18
(6) Alarm button
(7) Alarm symbol
(8) Menu symbol
(9) Child lock symbol
(10) Power failure symbol
3.2 Temperature display
The following are displayed in normal operation:
- the set freezing temperature
The temperature display flashes:
the temperature setting is being changed
-
- after switch-on the temperature is not yet cold enough
- the temperature has risen several degrees
The following displays indicate malfunction. Possible causes
and corrective action (see Malfunction).
- to
F0 F9
-
The power failure symbol

4 Putting into operation

4.1 Switching on the appliance

u Open the door.
u Press the On/Off button
w The appliance is switched on. The temperature display and
Alarm symbol Fig. 2 (7) flash until the temperature is cold
enough.
w If "DEMO" is displayed, demo mode is activated. Please
contact the after sales service.

5 Control

5.1 Child proofing

The child-proofing function enables you to make
sure that the appliance is not inadvertently switched
off by playing children.
5.1.1 Setting the child lock function
Activate setting mode:
u Press the Fast-Freeze button
5 seconds.
Fig. 2 (8) is indicated in the display.
w The menu symbol
w c flashes in the
display
If the function is to be switched on:
u Briefly confirm using the Fast-Freeze button
Fig. 2 (4) .
w c1 flashes in the
display
u Briefly confirm using the Fast-Freeze button
Fig. 2 (4) .
Fig. 2 (9) illuminates in the
w The child lock symbol
display.
w c flashes in the
display
w The child lock function is switched on.
If the function is to be switched off:
u Briefly confirm using the Fast-Freeze button
Fig. 2 (4) .
w c1 flashes in the
display
u Briefly confirm using the Fast-Freeze button
Fig. 2 (4) .
w c flashes in the
display
w The child lock function is switched off.
End setting mode:
u Briefly press the ON/OFF button
w The temperature is displayed again in the temperature
display.
* Depending on model and options
shines.
Fig. 2 (1) .
Fig. 2 (4) for approx.
.
.
.
.
.
Fig. 2 (1) .