Wash Programmes; The Programme Selector; Main Programmes; Special Programmes - Brandt WFH 1270 K Guide D'installation Et D'utilisation

Wash Programmes

The programme selector

The programme selector can be turned ei-
ther clockwise or anti-clockwise.
Quick 30˚C
30˚
40˚
30˚
3 With the programme selector a pro-
gramme is selected; however it will
start only if the »Start/Pause«
ton is pressed.
In the "Programme Table" you can find
more information on the individual wash
programmes.

Main programmes

Depending on the type of textile, the fol-
lowing main programmes are available:
• Cottons
• Synthetics
• Delicates
• Woollens
Each of these main programmes comprises
a complete washing cycle – wash, rinse
and, where appropriate, spin.
A
Always adjust the programme to suit
the textile type, colour, degree of soil-
ing and the permissible washing tem-
perature.
Observe the care symbols shown on
the garment labels!
For each main programme different tem-
peratures can be selected.
3 Select the temperature only as high as
absolutely necessary. A high tempera-
ture means high current consumption.
G
50
Stop
95˚C
60˚
50˚
40˚
30˚
60˚
50˚
40˚
40˚
30˚
/ Hand wash

Special programmes

For specific applications you can select any
of the following special programmes:
• Rinse
This programme is also used for
starching.
• Spin/Drain
This programme spins at maximum
speed.
A
For delicate fabrics the speed should
be reduced!
You can also use this programme if the
machine has stopped for a rinsehold
and you want to pump out water (see
"Rinse & hold"
• Quick 30°C
Select this programme if you need to
wash small loads of cotton/blended
fabrics only briefly.
but-
).