Philips AVENT SCF334 Mode D'emploi page 10

English
10
Cover
-
Power cushion
-
Bottle parts:
Philips Avent Natural bottle
-
Dome cap
-
Screw ring
-
Teat
-
Sealing disc
-
Accessories
Philips Avent storage cup
-
Philips Avent storage cup adapter
-
Supplies needed for cleaning:
Washing in sink
Mild dishwashing liquid
-
High quality drinking water
-
Soft brush or clean dish towel
-
Clean sink or bowl
-
Warning: Do not use antibacterial or abrasive cleaning agents when you are cleaning.
1 Disassemble the breast pump and bottle completely. Also remove the white valve from the breast
pump.
Caution: Be careful when you remove the white valve and when you clean it. If it gets damaged,
your breast pump does not function properly. To remove the white valve, gently pull at the
ribbed tab on the side of the valve.
2 Wash the parts in the sink or dishwasher.
Washing in sink: Detach all parts and soak for 5 minutes in hot water with some mild dishwashing
liquid. Clean all parts with a soft brush or clean dish towel and then rinse them thoroughly (Fig. 2).
Washing in dishwasher: Clean the parts, except the motor unit, the silicone tube and cap and the
adapter, in the dishwasher (on the top rack only).
Note: To clean the valve, rub it gently between your fingers in warm water with some washing-up
liquid. Do not insert objects into the valve, as this may cause damage.
Disinfection (optional)
After cleaning, if you also want to disinfect, you can boil the parts in water in a household pot.
Supplies needed for disinfection:
A household pot
-
High-quality drinking water
-
Washing in dishwasher
Mild dishwashing liquid/tablet
-
High quality drinking water
-