Maintenance And Service; Maintenance And Cleaning; Transport - BTI A36 BH WF Notice Originale

OBJ_BUCH-2748-001.book Page 40 Wednesday, March 2, 2016 2:59 PM
Vibration Damper
The integrated vibration damper reduces occurring
vibrations.
The soft grip handle increases the safety against
slipping off and thus provides for a better grip and
handling of the power tool.
Recommendations for Optimal Handling of the
Battery
Protect the battery against moisture and water.
Store the battery only within a temperature range
between –20 °C and 50 °C. As an example, do
not leave the battery in the car in summer.
Occasionally clean the venting slots of the battery
using a soft, clean and dry brush.
A significantly reduced working period after charg-
ing indicates that the battery is used and must be
replaced.
Observe the notes for disposal.

Maintenance and Service

Maintenance and Cleaning

 Before any work on the machine itself (e. g.
maintenance, tool change, etc.) as well as dur-
ing transport and storage, remove the battery
from the power tool. There is danger of injury
when unintentionally actuating the On/Off
switch.
 For safe and proper working, always keep the
machine and ventilation slots clean.
 A damaged dust protection cap should be
changed immediately. We recommend having
this carried out by an after-sales service.
– Clean the tool holder 3 each time after using.
In all correspondence and spare parts orders,
please always include the 6-digit order number giv-
en on the nameplate of the machine.

Transport

The contained lithium-ion batteries are subject to
the Dangerous Goods Legislation requirements.
The user can transport the batteries by road with-
out further requirements.
When being transported by third parties (e.g.: air
transport or forwarding agency), special require-
ments on packaging and labelling must be ob-
served. For preparation of the item being shipped,
consulting an expert for hazardous material is re-
quired.
40 | English
Dispatch battery packs only when the housing is
undamaged. Tape or mask off open contacts and
pack up the battery pack in such a manner that it
cannot move around in the packaging.
Please also observe possibly more detailed nation-
al regulations.
Disposal
The machine, rechargeable batteries, acces-
sories and packaging should be sorted for
environmental-friendly recycling.
Do not dispose of power tools and batteries/re-
chargeable batteries into household waste!
Only for EC countries:
According to the European Guide-
line 2012/19/EU, power tools that
are no longer usable, and according
to the European Guideline
2006/66/EC, defective or used bat-
tery packs/batteries, must be col-
lected separately and disposed of in an environ-
mentally correct manner.
Battery packs/batteries:
Li-ion:
Please observe the instructions
in section "Transport", page 40.
Subject to change without notice.
1 609 92A 1SL • 2.3.16