Sierra Wireless AirCard Guide De Démarrage Rapide page 5

Step 1: Set up Device
1. Remove the back cover.
2. Insert a SIM card. (Slide the SIM cover away from the label
and lift up. Insert the card in the slot, then lower the SIM
cover and slide it toward the label to lock the card in place.)
3. Insert the battery as shown in the illustration. (The
battery installs easily. If it does not go in easily, check the
orientation. Do not force it.)
Battery
SIM card
(To open, slide the
metal cover, then
lift up.)
4. Replace the back cover.
Your AirCard Mobile Hotspot comes with the battery partially
charged. When you need to recharge the battery, use the USB
cable to attach the hotspot to:
• A wall socket, using the AC adapter (fastest option)
• The USB port on your laptop
Gold contacts
3