How It Works - Marmitek MT20 Mini Timer Guide Utilisateur

How it works

The Mini Timer plugs into any AC outlet in your home and transmits digitally encoded
signals over your house wiring instantly or at the times you set. These signals are
received by the X-10 Modules.
You Plug a lamp up to 300 watts into a Lamp Module, an appliance such as a radio,
fan, or coffee pot into an Appliance Module and replace important indoor or outdoor
security lights up to 3600 watts with the In Wall Appliance Module (modules sold
separately).
SETTING IT UP
Connect the power supply to the Mini Timer and plug the power supply into any
convenient AC outlet.
NOTE: you must use the power supply that came with the Mini Timer. The power
supply contains circuitry required to control your Marmitek X-10 modules, so you
CANNOT replace it with a regular 12V power supply.
Install two AA alkaline batteries in the compartment on the back, if desired (to protect
the time and programmed events if there's a power outage).
MT20™ 9