Preparation Of The Appliance; Handling The Packed Appliance; How To Unpack The Appliance; How To Transport The Appliance - COMAC CA PACK 3L Manuel D'utilisation Et De Maintenance

Since the packaging elements (plastic bags, staples, etc.) are a
potential source of danger, they should not be left within the reach of
children, disabled persons, etc.
The gross weight of the appliance, including packaging, is 65 Kg.
The procedure for removing the device from its packaging is the
following:
1. Place the lower part of the outer packaging in contact with the
floor.
ATTENTION: Use the pictograms printed on the box as
reference.
To transport the machine, proceed as follows:
1. Take all necessary steps to ensure that the device is in a safe
condition (see MACHINE SAFETY'").
ATTENTION: Users are advised to always wear protective
gloves, to avoid the risk of serious injury to hands.

LOCATION OF THE MAIN COMPONENTS OF THE APPLIANCE

The basic components of the appliance are as follows:
1. Collection tank unit.
2. Collection tank lid unit.
3. Filter - collection bag unit.

LOCATION OF THE COMPONENTS OF THE COLLECTION TANK COVER UNIT

The components of the collection tank cover are as follows:
1. Collection tank lid.
2. Vacuum nozzle.
3. Cap closing the vacuum nozzle.

PREPARATION OF THE APPLIANCE

HANDLING THE PACKED APPLIANCE

The dimensions of the package are as follows: ATTENTION:

HOW TO UNPACK THE APPLIANCE

2. Remove the outer package.
3. Using a chute, slide the machine from the pallet.

HOW TO TRANSPORT THE APPLIANCE

2. Make sure that the collection tank is empty, otherwise empty
it (read the paragraph
COLLECTION
3
1
2
3
1
1
21
U/M
A mm 1110
B mm 586
C
mm 646
ATTENTION: Move the packaged product in accordance with
legal legislation requirements regarding accident
prevention, the size and the mass of the packaging
itself.
ATTENTION: these operations must be carried out using
protective gloves to avoid any possible contact with the
edges or tips of metal objects.
"CHECKING AND CLEANING THE
BAG").
ATTENTION: for transportation without a pallet, secure the
device according to the directives in force in the
country of use so that it does not slide or tip over.
2
1