Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
DROP 4.5 kW
DROP 6 kW
240V 2~
208V 2~
Fitting the stones
Upon stacking the stones, one should monitor that the heating
elements are not bent and that there is a sufficient air circulation
around the heater elements.
•
Stack the stones sparsely between the heating elements. When
the stones have been stacked too close to each other, the heating
elements may overheat (= shorter useful life) and slow the heating of
the sauna.
•
Stones with a diameter of 2-4 in (5–10 cm) are suitable for the
heater.
•
The stones on the external surface of the heater must fully cover
the heating elements. The heating elements must not be visible.
•
The external surface of the stone container must be stacked full
as tightly as possible; the surface of the heating elements must
not be visible.
•
Using ceramic stones in the DROP heater is allowed upon the
user's responsibility.
DROP 7.5 kW
DROP 9 kW
L1
L2
L1
L2
240V 2~
208V 2~
7
Publicité
Table des Matières
