Intended Use; Safety Instructions - walser 16773 Mode D'emploi

2. Safety

2.1 Intended use

The heated seat pad is designed exclusively for heating of persons while
driving. It is intended solely for private use and is not suitable for the com-
mercial sector.
Use the heated seat pad only as described in this user manual. Any other
use is considered to be improper and may result in damage to property or
even personal injury. The heated seat pad is not a toy.
The manufacturer or dealer will not accept liability for damage caused by
improper or incorrect use.

2.2 Safety instructions

Faulty attachment of the heated seat pad can prevent/distort the discharge
of the seat airbag in case of a collision.
- Use the heated seat pad only in such a way that the seat airbag is not
covered or affected. For questions about the seat airbag read the hand-
book for your car or ask your garage.
- Strictly follow this user manual when attaching the heated seat pad.
- Reposition the heated seat pad when shifted. If this is no longer possible
due to deformation or advanced wear, remove the heated seat pad.
Faulty electrical installation or excess supply voltage may cause an electric
shock.
- Only connect the heated seat pad to a 12V electrical power socket of a
vehicle (cigarette lighter).
- Ensure that the 12 V vehicle power socket is always easily accessible, so
that you can quickly disconnected the power cable in the case of accident
or malfunction.
- Do not operate the heated seat pad if it has been visibly damaged or the
16
Danger to life!
Danger of electric shock!