walser 16773 Mode D'emploi page 19

the influence of weather (rain, etc.).
- Never immerse the heated seat pad in water to clean or use a steam cle-
aner for cleaning.
- Do not use the heated seat pad if it has cracks or fissures or is deformed.
Replace any damaged components only with matching original spare
parts.
- Do not insert needles or pointed objects in the heated seat pad.
- To avoid overheating, do not operate the heated seat pad near to heat
sources, open flames such as candles, or in direct sunlight.
- When operating, ensure that the 12V plug is firmly plugged into the 12 V
vehicle power outlet and it is free from dirt. In the case of insufficient con-
tact between the plug and 12V vehicle power outlet, the vehicle vibration
can lead to the power supply switching on and off for short intervals. This
can lead to overheating.
- Do not switch on the heated seat pad when folded or in a pushed-together
condition.
- Do not place heavy objects such as suitcases on the heated seat pad.
3. Checking heated seat pad and scope of supply
The heated seat pad can be easily damaged, if you carelessly open the
packaging with a sharp knife or other sharp object.
- Therefore, follow these steps very carefully when opening.
1. Take the heated seat pad from the packaging and check whether the pad
or individual parts are damaged. If this is the case, do not use the heated
seat pad. Consult the manufacturer.
2. Check whether the delivery is complete (see Fig. A).
Risk of damage!
19