Festool DWC 18-2500 Guide D'utilisation page 17

Maintenance of the magazine attachment
The attachment generally does not require any
maintenance. After long period use, we recom-
mend to clean with pressurized air.
The magazine attachment may be lubricated in the
area of the carriage guide (see picture [14].
Prior to cleaning, dismantle the attachment, as
specified above.
Prior to cleaning, remove the collated screws from
the attachment, as specified in the point <Removing
the collated screws>.
Pull the attachment from the drywall screwdriver.
14
Disassembly of the slides

Push the depth stop 15-3 into the housing until
the arresting button [15-1] is at the level of the
sign for dismantling the slides [15-2] see figure
[15].
15
15-3
15-1
15-2

Press the arresting button [15-1] and concur-
rently remove the slides from the holder – see
figure 16.
16

Press the button 17-1 and concurrently release
the depth stop – see figure [17].
17
Transport lever disassembly

Press the button [18-1] and concurrently pull it
out– see figure [18].
18
17-1
18-1
17