The use as designated provisions also include:
Following all instructions from the operation
manual and the supplied operation instructions
and
Complying with all cleaning and treatment
conditions specified by the manufacturer.
The socket heater must not be used:
To heat enclosed or residential spaces
(residential buildings) or for operation purposes
in these spaces;
Near flammable materials (e.g. paper, building
materials);
In places where volatile materials (e.g. petrol,
solvents, chemicals) are kept or where an
explosive atmosphere may be produced;
After any voluntary design change of the socket
heater;
In case of wrong or unacceptable connection to
the source of gas
In places not ventilated sufficiently.
Disposal
Disposal instructions are illustrated in the form of
pictograms on the device or packaging. Description of the
pictograms is given in "Identification" chapter.
Disposal of transport packaging
Packaging protects the device against damage during
transport. Packaging materials are usually selected
according to their effect on environment and disposal
methods and can therefore be recycled.
Returning of the packaging back to circulation saves
resources and costs for packaging disposal.
Parts of the packaging (e.g. foil, styropor) may be
dangerous for children. Risk of suffocation!
Keep these parts of the packaging out of reach of children
and dispose as soon as possible.
Operator requirements
The operator must carefully read the Operating
Instructions before using the appliance.
Qualification
No special qualification is necessary to use the appliance
apart from detailed instructions by an expert.
Minimum age
The product has been designed to be used by persons
over 18 years of age.
If the product is to be used by children below the age of 8
or persons with reduced physical, sensory or mental skills
or with a lack of experience and knowledge, they must be
supervised or instructed in the safe use of the appliance
and understand the resulting risks. Children must not play
with the appliance. Cleaning and user maintenance must
not be performed by children without supervision.
Training
Using the appliance only requires appropriate instructions
by an expert or reading the Operating Instructions. No
special training necessary.
Service
Any technical questions? Complaint? Do you need
spare parts or operation manual?
Go to our website www.guede.com and the section
Service will help you quickly and without bureaucracy.
Please, help us to help you. In order to identify your device
in case of complaint, please indicate serial number, order
number and year of manufacture. All information is
available on the product label. To have all information
always at hand, put them down.
Serial number:
Order number:
Year of manufacture:
Phone:
+49 (0) 79 04 / 700-360
Fax:
+49 (0) 79 04 / 700-51999
E-Mail:
support@ts.guede.com
Important information for the customer
Please be sure to know that returning the product in or
after the warranty period must be made in the original
packaging.
Maintenance and storing
To clean the appliance, use a smooth and fine soap water
solution. Prevent any direct contact of aggressive cleaning
agents with the appliance. No aggressive, volatile or
caustic cleaning agents may be used.
Have the socket heater checked by a qualified authorised
expert once a year.
The hose must necessarily be replaced if damaged.
Protect the appliance against moisture and dust.
If the appliance has not been used for a long time, remove
it from the gas bottle, cover the heater surface and put it to
a dry, safe place inaccessible to children.
Troubleshooting
Failure
Cause
No gas
Gas bottle is
empty
Valve on the gas
bottle is closed.
Safety valve on
building dryer is
closed
Burner flame has
Thermal element
extinguished
has not been
during operation
warm enough.
Gas bottle is
empty
Wind or draught
has extinguished
the flame.
Remedy
Change the gas
bottle.
Open the valve.
Try restarting.
Try restarting.
Change the gas
bottle.
Put the appliance
out of reach of wind
and draught, let it
cool down for a
couple of minutes
and try to restart it.