Metabo NMP 18 LTX BL M10 Notice Originale page 13

Aluminium
Steel
Stainless steel
Emission values
These values make it possible to assess the
emissions from the power tool and to compare
different power tools. The actual load may be higher
or lower depending on operating conditions, the
condition of the power tool or the accessories used.
Please allow for breaks and periods when the load
is lower for assessment purposes. Arrange
protective measures for the user, such as
organisational measures based on the adjusted
estimates.
Vibration total value (vector sum of three directions)
determined in accordance with EN 62841:
a = vibration emission value
h
K = Uncertainty
h
Typical A-effective perceived sound levels:
L = sound-pressure level
pA
K , = Uncertainty
pA
During operation the noise level can exceed 80
dB(A).
Wear ear protectors!
ENGLISH en
13