Auto" Cleaning (Cleaning Programmed Every Day Of The Week); Rapid Rinsing; Empty Detergent Bottle Detection; Replacement Of The Chemical Container - ELRO PRECIJET+ 6 GN1/1 Notice D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

3E-490044NU – 03/20
16.2

"AUTO" CLEANING (cleaning programmed every day of the week):

- Switch the oven on.
- Wait until the start up screen disappears. If preheating starts press STOP.
- Select the Service screen.
- Press to select:
- Put in your PIN code (0000 by default, select Client parameters in the service screen) then validate.
- The daily cleaning screen will appear.
- For each day select the level of clean required and the time by pressing the corresponding touch button then validate
- The automatic cleaning programme is displayed. The cleaning cycle will start at the set hour each day and at the intensity selected
- To deactivate the automatic cleaning select Manual cleaning enter your PIN. The values programmed in will be remembered for the
next time you select automatic cleaning.
- Please note: If a cooking cycle is running at the time an automatic wash should start the cleaning cycle will be cancelled.
16.3

RAPID RINSING

16.4

EMPTY DETERGENT BOTTLE DETECTION

16.5

REPLACEMENT OF THE CHEMICAL CONTAINER:

The cleaning chemical supply hose is labelled which correspond to the container.
Never use descaling product into the automatic cleaning system. This could seriously damage the
ovens hydraulic circuits.
Page 6
"Auto cleaning"
"Programming screen".
"Manual cleaning"
Rapid rinse function using only water (no chemical) for example between
two different types of cooking
This message appears when the container is almost empty
Validate or change the size of the container.
Note the counter is calibrated against this volume.
EN
ELRO-Werke AG
Wohlerstrasse 47
5620 Bremgarten

Publicité

Table des Matières
loading

Table des Matières