EMAG PROFESSIONAL EMMI-DENTAL Mode D'emploi page 12

w w w . e m m i - d e n t . d e
®
emmi-dental
PROFESSIONAL
®
emmi-dent 6
PROFESSIONAL
1
Connect the charging
station with the socket.
4
Brie y wet the bristles of the ultrasound
attachment under running water.
6
Lightly spread the toothpaste
over the inside and outside
of your teeth with the bristles
of the ultrasound attach-
ment.
9
You can simply plug the device with inserted ultrasound
attachment into the charging station again after dental micro
cleaning – or if you are for instance travelling, you can operate
the device for ca. 10 days without recharging, if the batteries
are fully charged (after ca. 24 hours of charging time).
12
Dental Micro Cleaning with Real Ultrasound
It functions so simply!
2
Insert the handpiece from
above into the charging
station (charging time: ca.
24 hours)
7
Then hold the bristles motionless on the teeth,
slightly from inside, outside and from above (chewing
surface) – without applying pressure – for ca. 5 to 10
seconds. The bristles of the ultrasound attachment
each cover 2-3 teeth. The actual retention time
depends on the degree of impurity of the teeth.
5
Apply only Ultrasound Toothpaste (the for-
mation of millions of micro-bubbles only func-
tions with this) to the bristles (approximately
twice the size of a pea).
8
10
If you clean your teeth twice a day, please replace the
ultrasound attachment after 3 months.
English
3
Now insert the ultrasound
attachment vertically from
above into the handpiece and
turn on the device.
After completion of dental
cleaning (while the device is tur-
ned on), brie y rinse the bristles
and handpiece under running
water, turn the device off and
brie y dry the handpiece (not the
bristles). Ultrasound automati-
cally disinfects the bristles.