Flex FX1171T Manuel De L'utilisateur page 13

AUXILIARY HANDLE (FIG. 9)
This tool is equipped with an auxiliary handle.
For ease of operation, you can use the handle
with either the left or the right hand. The handle
can be locked in left or right positions.
To install the auxiliary handle:
a. Remove the battery pack from the tool.
b. Place the direction-of-rotation selector in the
center lock position.
c. Loosen the auxiliary handle by turning the
handle counterclockwise.
d. Align the raised portion on the auxiliary handle
with the grooves on gearbox of the drill/driver,
and then put the auxiliary handle onto the tool
as shown.
e. Hand-tighten the handle by turning the handle
clockwise.
To remove the auxiliary handle:
a. Remove the battery pack from the tool.
b. Place the direction-of-rotation selector in the
center lock position.
c. Loosen the auxiliary handle by turning the
handle counterclockwise.
d. Remove the auxiliary handle from the tool.
WARNING
the auxiliary handle by turning the handle
clockwise before every use.
WARNING
Therefore, the direction-of-rotation (forward/
center-lock/reverse) selector should always
be locked in the center position when the
tool is not in use or or while carrying the tool
at your side.
For safety and ease of
operation, securely tighten
Battery tools are always in
operating condition.
Fig. 9
-13-
Auxiliary Handle