Flex FX1171T Manuel De L'utilisateur page 12

REMOVABLE BIT CLIP (FIG.7)
Your tool is also equipped with a removable bit
clip that can be positioned on the side of the
tool for storing bits.
Install the bit clip onto the tool:
a. Remove the battery pack from the tool.
b. Align the hole of the bit clip with the threaded
hole on the base of the tool.
NOTICE: Ensure that the protruding part on the
bit clip is kept flush against the step on the base
of the tool to keep it steady.
c. Insert the screw and securely tighten the
screw with a screwdriver (not included).
Remove the bit clip from the tool:
a. Remove the battery pack from the tool.
b. Use a screwdriver to loosen the screw that
attaches the bit clip to the impact wrench.
c. Remove the screw and the bit clip.
STRAP FIXING (FIG. 8)
Strap fixing is provided to attach a wrist strap
(not included) in order to reduce the chances of
dropping your tool. Wrap the strip around your
hand when carrying the tool.
Fig. 7
Removable
Bit Clip
Fig. 8
-12-
Step
Protruding
part
Strap Fixing