Twin-Star International Classic Flame 23DE9047 Manuel D'instruction page 7

8. Attach the upper side panels (U, M) on the top
of the assembly from the step 7 as shown in
diagram. Screw the Bolts (L) through the
Plastic Connector (Z1) to the Left Upper Side
Panel (U) and Right Upper Side Panel (M).
Use a Phillips head screwdriver to tighten.
9. Locate Side Back Panel (K) and Center Back
Panel (R), attach to the back of the completed
assembly from step 8. Use a Phillips Head
screw driver, tighten screws (Y1) through
the pre-drilled holes in the Back Panels to the
completed assembly.
E-6
Left
Upper
M
Side
U
Panel
Y1
Y1
Center Back Panel
R
K
Side
Back
Panel
Right
Upper
Side
Panel
K
Side
Back
Panel