Getting Started; Helpful Hints; Care & Cleaning - Twin-Star International Classic Flame 23DE9047 Manuel D'instruction

PLEASE READ AND FOLLOW ALL SAFETY TIPS
Use of power tools during assembly of this product may cause damage to the item.
It is NOT recommended to use any type of electric screwdriver in the assembly of
this product.
1. Before assembly, carefully use scissors or utility knife to cut and unwrap all parts. Make sure you do not
discard the hardware.
2. Make sure that you have all the parts listed. If you are missing any parts please email Customer Service:
www.twinstarhome.com or call 1-866-661-1218 in English, 1-866-374-9203 in French or
1-866-661-1218 in Spanish. Please identify the parts you need and model number. Make sure to include
your name and address.
DO NOT MOVE MANTEL OR INSERT WHILE PLUGGED INTO POWER SUPPLY.
• Some steps are more easily handled with two adults.
• Attach the f replace insert to the completed wood mantel last. Install insert in from the back of the
f replace so as not to scratch the hearth/base.
• Use care in assembling your new f replace, take your time and use the hardware provided and a quality
Phillips head screwdriver.
NEVER OVER TIGHTEN BOLTS.
• Do not sit on any part of the mantel.
1. Dust your f replace regularly with a soft non-lint producing cloth or household dusting product.
2. You can clean your f replace with a gentle non-abrasive household cleaner. Make sure to dry your
f replace immediately with a soft cloth or towel.
Now it is time to assemble your Fireplace.
All panels are labeled Left and Right as
viewed from the front of unit.
To avoid scratching the finish of
your new mantel place all parts on a
scratch free surface such as a rug or
carpet.
1. Locate the Center Left Side Panel (B), Center
Right Side Panel (C), Center Shelf (D) and set
out face down on a scratch-free surface. Screw
the Bolts (L) through the Plastic Connector
(Z1) to the Center Left Side Panel (B) and
Center Right Side Panel (C). Attach the Center
Left Side Panel (B) and Center Right Side
Panel (C) to Center Shelf (D), using Bolts (L)
through the holes in the Plastic Connector (Z1)
and tighten.
E-2
WARNING

GETTING STARTED

CAUTION:

HELPFUL HINTS

CARE & CLEANING
Center
Shelf
Center
Left
Side
Panel
D
B
Center
Right
Side
Panel
C